Best Way To Apply Polyurethane To Floor

Into the mixture and brush the wood with long even strokes from end to end.

Best way to apply polyurethane to floor. For the areas around the edge of the floor where it meets the walls use a soft bristled paintbrush. Brush flat surfaces with a thin coat using a bristle brush. Spray less accessible areas with aerosol polyurethane.

Work with the grain and avoid applying too much polyurethane to avoid raising the grain. Wipe contoured surfaces with a clean cloth going with the grain. Some types of floors will look a lot better with water based polyurethane than oil based and those include white washed gray stained and natural maple hardwood floors.

Apply a very thin coat of polyurethane with a fine brush foam pad or cloth. There are three choices for applying polyurethane properly to a hardwood floor. Exploded tip synthetic brushes with each strand divided into multiple strands at the tip may introduce air bubbles into the finish.

Start with a three foot wide strip brushing with the grain and using a mop like a push broom to back brush the urethane back brushing means to move the mop from the wet edge back into the wet finish. Maple if you add oil based on top of it you will see how yellow it ends up turning up over time. Do not put pressure on the applicator while coating.

After securing the corners use a renowned t bar applicator for polyurethane to apply the first coating on the floor. The initial coat should be dry within a couple of hours and you can then apply a second coat. Forms a thicker coat so the finish builds up fastest.

Start at the farthest corner from the. Use a paint stirrer to thoroughly stir the polyurethane. Use a brush or painter s pad to apply a thin layer of polyurethane.