Can Engineered Floors Be Refinished

As a general rule solid hardwood can be refinished but most engineered hardwoods can not.

Can engineered floors be refinished. Floors with a wear layer less than 2 millimeters thick can tolerate a light scuff sanding with a buffer. Engineered wood flooring with a wear layer of 2mm or less cannot be sanded down fully but can take a light scuff sanding using a buffer and then refinished. Engineered wood can potentially be refinished but this is wholly dependent on the thickness of the top layer of wood.

Indications that your hardwood may be engineered. Can engineered wood flooring be sanded and refinished. Engineered hardwood flooring can be refinished though not as many times as solid hardwood.

It all depends on the thickness of the wear layer. By the way this discussion applies to engineered parquet flooring too. An engineered floor with a 3 millimeter top for instance can handle two refinishings.

The thickest engineered floors can be sanded and refinished between 3 5 times due to a top layer of about 4 to 6mm. Most wear layers on today s engineered hardwood floors vary between 5 to 6mm. In this situation re sanding can be done although the bevels and some of the scraping will disappear.

Thicker top layers can be sanded just like solid wood allowing you to erase deeper scratches and dents. If you have an engineered hardwood installed that is damaged due to traffic dented and scratched before sanding down at it there are a few things to consider. This of course depends on they quality of the wood thickness of top layer and installation method see below.

The wear layer is the top solid part of an engineered hardwood floor that will wear away as your floor ages. It cant be thinner than 3mm. That depends on how many times it has been refinished before and how thick the wear layer is.