Remove Floor Molding

Remove the nails from the molding by pulling them out from the back of the wood with a pair of pliers.

Remove floor molding. Insert the blade close to a nail and pry outward to open a gap then insert a pry bar and gently work out the nail. Take your time and work throughout the entire length of the baseboard. Item 1524924 model lmqsu00603.

Alternatively you can take the opposite tack and pound the finish nails flush to the wall with a hammer. This will cut through any caulking or paint at the seams so you can remove each piece of molding separately from the others that it touches. Work your way along the molding using the pry bar and shims to loosen the molding.

Use the tip of your utility knife to slice along the seams where pieces of crown molding meet in the corners and anywhere else where 2 pieces have a seam. You can also use a small pry bar or tongue and groove pliers levering the tool against a wedge or block to protect the wall surface it s also a good idea to use a block with a hammer. For vinyl plank flooring or vinyl tile flooring pry up a corner of one of the tiles with a putty knife.

The most trusted trim and molding services in springfield are on porch. If it doesn t come off you will need to use the prybar and hammer to chip at the hardened adhesive. A stiff metal putty knife is the ideal tool to use for this because it will cause minimal damage.

If it comes up far enough slip the putty knife underneath it and pry the tile or plank completely off. After the molding is loose use a larger flat pry bar for more leverage and finish removing the molding from the wall. Get the best info on local trim and molding services.

You do not want to remove one side before the other. Remove baseboard try a new way of taking off existing floor molding without damaging it or your walls. Armed with this innovative tool and a novel technique you ll make fast clean and.